<th id="yqc20"><option id="yqc20"></option></th>
<th id="yqc20"></th>
    1. <center id="yqc20"></center>
    2. <th id="yqc20"><option id="yqc20"><acronym id="yqc20"></acronym></option></th>
      <code id="yqc20"></code>

      1127及2205(仿木鞋料)說明書


      德州市鑫華潤科技股份有限公司A/B料產品說明書???DeZhouXinHuaRunTechnologyCO.,LTD.?A/BShoeMaterialsProductManuals1.特點(Feature):仿木鞋底用料(Polyesterpolyolforwood-imitationsoles)2.原液特性:TypicalpropertiesofPUresin:品名Nameofproducts外

      所屬分類:

      鞋底原材料

      關鍵詞:

      聯系電話

      1127及2205(仿木鞋料)說明書詳情


           德州市鑫華潤科技股份有限公司A/B料產品說明書
          De Zhou Xin HuaRun Technology CO., LTD.
        A/B Shoe Materials Product Manuals

      1.特點(Feature :仿木鞋底用料(Polyester polyol for wood-imitation soles
      2.原液特性: Typical properties of PU resin:


      品名
      Name of products

      外觀
      Appearance
      (40)

      粘度
      Viscosity
      (mPas/40)

      密度
      Density
      (g/cm3/40)

      包裝
      Package
      (kg)

      保質期
      Shelf life
      (month)

      貯存溫度
      Storage temperature
      ()

      HR-P-1127

      液狀
      Liquid

      2500±300

      1.2±0.02

      18 (Net)
      藍標簽
      Blue label

      6

      20~25

      HR-I-2205

      液狀或蠟狀Liquid or waxy

      200±50

      1.20±0.02

      20 (Net)
      黃標簽
      Yellow label

      3

      20~25

      3.催化劑與輔助劑Catalyst & Additives:
      催化劑HR-C-3的加入量為:250±10g/17kg,水的加入量為:80-110g/18kg
      The adding amount of HR-C-3should be 250±10g/17kg, the adding amount of water should be 80-110g/18kg.
      4.成型條件及物性值:Typical processing parameters & Typical Properties:


      反應性
      Reaction
      characteristics

      技術參數
      Technical
      parameters

      項目
      Items

      物性值
      Physical
      properties

      參考配比
      A+C/B Mix ratio (By Weight)

      100/140-150

      成型密度(g/m3)
      Molded density (g/m3)

      0.3-0.35

      使用溫度(℃)
      Material Temperature (℃)

      38-42/38-42

      硬度
      Hardness

      A型Asker A

      90-95

      C型Asker C

       

      乳白時間(s)
      Cream time (s)

      4-6

      拉伸強度(MPa)
      Tensile strength (MPa)

      ≥3.0

      升起時間(s)
      Rise time (s)

      30-35

      伸長率(%)
      Elongation (%)

      ≥250

      自由泡密度(g/m3)
      Free rise foam density (g/m3)

      0.13-0.15

      撕裂強度(直角)(kN/m)
      Tear strength (right angle) (kN/m)

      ≥4.0

      金屬模具溫度(℃)
      Mold temperature (℃)

      50-65

      耐折性(常溫25℃×5萬次)
      Folding endurance (25℃×5 million times)

      無裂紋

      脫模時間(min)
      Demould time (min)

      3-4

      DIN耐磨
      DIN abrasion resistance

      ≤300

      • 配合比率是以最佳配比值為基礎,此配比值會隨添加的顏料助劑種類和添加量不同而變化。The mixing ratio is based on the best proportion, this ratio will be changed with the kind of dye and its adding amount.
      • 自由泡沫密度會依季節(溫度,濕度)的不同而變化。Free rise density may vary with temperature & humidity.
      • 該物性數據是對6mm厚的試驗片測試獲得的數據。These physical data are acquired by testing a sample of 6mm thick.
      • 以上數據僅供參考,具體數據以實際操作為準,如需其他物性指標,請與我公司聯系。Data listed above are just for reference.  The detail data are subject to practice operation. If other physical properties are required, please contact us.

      相關產品

      產品留言

      欧美一级A一级a爱片免费免免_国产日韩欧美一区二区ppp_911国产在线专区_精品国产一区二区三区